LABOR S LEISTER Heat Gun for Difficult Welding Tasks
In stock
Only %1 left
SKU#: LABOR S: SMALL AND HANDY
As low as
$881.00
Developed for laboratory use but also suitable for small welding tasks where access may be difficult.
- Temperature adjustment via rotary knob
- Very small and handy device
- Ideal for draw welding and tacking
- Air supply with ROBUST blower, MINOR or with compressed air
- Ideal for mobile use when coupled with MINOR blower
Write Your Own Review
Additional Products and Accessories
Best Selling Nozzles
Wide Slot Nozzles
Speed Welding Nozzles
-
107.139 | Fillet Weld Nozzle 3/16" x 15/32" | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
107.137 | For tape 0.3"/ 8 mm | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
106.993 | 1/4 inch Triangular | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
106.992 | 5/32" / 4mm | Triangular | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
106.991 | 0.2" / 5 mm Round | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
106.990 | 0.16" / 4 mm Round | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
106.989 | 0.12 inch / 3mm Round | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
105.433 | Narrow Preheat 0.2" / 5mm Round | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
105.432 | Narrow Preheat 0.16" / 4mm Round | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
-
105.431 | Narrow Preheat 0.12" / 3mm Round | Speed Welding Nozzle
This nozzle requires a 5mm round tubular nozzle:
Tubular Nozzles
-
-
-
107.152 | 90° (ø 0.85 inch) ø 0.47 inch | Tubular Nozzle | Hot Jet
To be used with all speed welding nozzles for the Hot Jet S and Labor S.
-
-
-
-
105.567 | Straight tubular nozzle ø 0,2 x 5,9 inch
To be used with all speed welding nozzles for the Hot Jet S and Labor S.
Screw-On Nozzles
-
113.874 | Round, without tacking tip, 0.16" | Screw On Nozzle
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
113.399 | Round with tacking tip, ø 0.16" Screw-On Nozzle
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
126.552 - 0.16” (4 mm) screw-on nozzle for fluor plastics
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
113.877 | Triangular shaped, without tacking tip, 3.54-0.22" | Screw On Nozzle
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
113.876 | Round, without tacking tip, 0.12" Screw On Nozzles
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
113.670 | Triangular shaped with tacking tip, 3.54-0.22" | Screw On Nozzle
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
113.666 | Round with tacking tip, ø 0.12" | Screw-On Nozzle
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
106.987 | Triangular Screw-On nozzle 0.27 x 0.21 inch
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
-
106.986 | 0.27 inch, without tacking tip Screw-on Nozzle
This nozzle screws onto Triac/Diode with the screw-on "protection tube" and requires the Triac/Diode nozzle adapter 143.833 or Hot Jet S/Labor S nozzle adapter 143.831. This nozzle also fits directly onto the Welding Pen.
Reflectors
Soldering/Desoldering Nozzles
Heating Elements
Mica Tubes
Hand Pressure Rollers
-
-
-
-
-
-
-
-
-
-
140.161 - 1.1” (28 mm) silicone pressure roller with ball bearings
Leister's 140.161 28 mm Pressure Roller has loads of grip with the wooden handle making it easier to seal welds without the need to exert excessive force.
